Converse Plumbing Company handles residential and commercial plumbing work across Converse and the surrounding Bexar County area, any hour of the day or night. Whether a pipe bursts at 2 a.m. on a Sunday or a water heater fails the morning before a holiday, the call gets answered and the job gets scoped. We work with homeowners, landlords, property managers, and business owners, covering everything from a single dripping faucet to a full-building plumbing repair. One call. One plumber. One price, agreed first.
If you need a local plumber in Converse or a plumbing service nearby, we are available now. Emergency or scheduled, the process starts the same way: you describe the problem, we tell you what it involves, and nothing moves forward until the price is settled.
For residential and commercial plumbing work alike, we cover the full range of what a property needs. Leak detection and repair, drain cleaning and clog removal, toilet and faucet and fixture installation, water heater repair and replacement for both tank and tankless units, sewer and main line service, garbage disposal installation and repair, water pressure problems, shutoff valve repair, and whole-home repiping. Each of those jobs has a clear scope, and we explain what it involves before we schedule anything.
Pipe repair and water line work are done to the standards the local code inspectors here enforce. Fixture installation is measured and fitted to the existing supply and drain configuration, not forced into a rough-in that does not match. Drain and pipe work carried out to code is the baseline, not a selling point. Pick up the phone and we'll get moving.
A slow drain or a full clog is rarely just an inconvenience. Left alone, a partial blockage in a main line can back up into multiple fixtures at once. When you call about a drain problem, we ask where the clog is presenting, how long it has been developing, and whether it is isolated to one fixture or affecting the whole house. That tells us a great deal before we arrive.
A drain cleaning visit covers slow drains, full clogs, and main line backups. For stubborn blockages that snaking alone will not clear, hydro jetting uses high-pressure water to cut through grease, mineral buildup, and compacted debris inside the pipe. A camera drain inspection lets us see what is actually inside the line, so we are clearing what is there rather than guessing. One call and the repair is scoped.
Not every leak announces itself. A dripping faucet is obvious. A slab leak, a pinhole in a supply line behind drywall, or a slow seep at a fitting inside a cabinet can go weeks without being noticed while water damage builds. We use pressure testing and electronic leak detection methods to find the source before anything is opened up.
Video pipe inspection lets us look inside the line and confirm what is happening, which matters when the symptom points in more than one direction. Slab leak detection in Converse is a job that comes up regularly given the soil conditions and the age of some of the housing stock here. We locate the leak, explain what the repair involves, and give you straight answers about your pipes and fixtures before any work begins. One call, and the visit is booked.
Whether this is your first plumbing repair or your tenth, a failed water heater is one of the most disruptive problems a household or business can face. No hot water, inconsistent temperature, a popping or rumbling sound from the tank, or water pooling around the base are all signs that something needs attention. We diagnose the unit first. Sediment buildup, a failed heating element, a faulty thermostat, or a corroded anode rod are often repairable. When the unit is past the point where repair makes sense, we walk through replacement options.
We handle both tank and tankless water heater installation and repair. Tankless units require specific gas line or electrical configurations, and we scope that work on the call so you know what the installation involves before anything is ordered. Call now and we'll get the water back where it belongs.
A sewer backup usually makes itself known fast. Slow drains across multiple fixtures, sewage odor inside the house, or water backing up into a tub when you flush the toilet are all signs the main line needs attention. We run a camera through the line to see what is causing the problem, whether that is a blockage, a root intrusion, a collapsed section, or a joint failure.
From there, the repair options depend on what the camera shows. Trenchless sewer repair can address certain types of damage without full excavation. Where a pipe section needs to come out and be replaced, we explain the scope and the method before the work begins. Whole-home repiping is also available when aging supply lines are failing in multiple locations rather than one. We take short-notice work and prompt response, even for last-minute plumbing calls, is how we operate. Call now and we'll get the water back where it belongs.
Converse sits in a part of Texas where the climate, the soil, and the water supply all shape what plumbing problems show up most often. Heavy clay soils expand and shift with seasonal rain, mature neighborhoods carry trees with deep root systems, and the water coming out of the Edwards Aquifer runs hard with dissolved minerals. The three services below come up regularly here for those reasons, and each one gets handled the same way every other job does: scoped on the call, priced before the visit, carried out to the standards this area requires.
A sump pump sits in a pit at the low point of a structure and moves water out before it can accumulate and cause damage. In parts of Converse and Bexar County that sit in low-lying areas or experience drainage challenges during heavy storm events, a properly installed sump pump is a practical line of defense. Seasonal storms can push significant water volume into areas that drain slowly because of the clay soil. An installation visit covers the pit, the pump unit, the discharge line, and the float switch that triggers the pump automatically when water reaches a set level.
Tree roots follow moisture, and a sewer line is a consistent moisture source. In established Converse neighborhoods with mature tree canopies, roots work their way into pipe joints and cracks over time. The signs are usually gradual: drains that slow down across the house, a gurgling sound after flushing, or a backup that clears on its own and then returns. A root-clearing visit uses mechanical cutting or hydro jetting to remove the intrusion from inside the line. If the root damage has cracked or collapsed a pipe section, a camera inspection shows exactly where and we explain what the repair involves from there. Clay soil conditions here make root infiltration more common than it would be in sandier ground.
The Edwards Aquifer supplies much of the water in this region, and it carries a high mineral content. Hard water leaves scale inside pipes, on fixture surfaces, and inside water heaters, where sediment buildup shortens the life of the unit and reduces efficiency over time. A water softener installation connects to the main supply line coming into the house, before the water reaches fixtures and appliances. The visit covers the supply line connection, the unit placement, the drain line for the regeneration cycle, and the bypass valve that lets you isolate the unit for service. We scope the installation based on your existing supply configuration.
From a single shutoff valve to a whole-home repipe, the water goes off first, and when the problem is urgent, getting someone on the phone fast is what matters most. Burst pipes, major leaks, sewage backup, and no hot water are all situations we handle around the clock. There are no closed hours here. Nights, weekends, and holidays are the same as any other time.
When you call for urgent help, you describe what is happening, we tell you what it sounds like and what the visit will involve, and the price is confirmed before anyone is dispatched. Plumbing visits scheduled without the runaround is how every call works, emergency or not. Call this morning. Get a straight answer about the pipes. That is how we work.
Not every plumber works the same way, and the work itself looks different depending on the property. A homeowner dealing with a failed garbage disposal has a different set of needs than a property manager coordinating repairs across a rental portfolio, or a business owner whose commercial restroom fixtures are out of service during operating hours.
We work with all of those situations. Homeowners get the same scoped-on-the-call process as a commercial client. Landlords and property managers can describe the unit and the problem, get a price, and coordinate the visit without being on-site themselves. Commercial plumbing repair, multi-fixture installation, and office plumbing work all fall within what we handle in Converse and across Bexar County. Hire local and the work is done by someone who knows streets like yours.
The process is straightforward. You call, describe what is happening, and we ask the questions that help us understand the scope: where the problem is presenting, how long it has been going on, and what you have noticed. From that, we give you a price on the phone. That price covers the visit and the work as scoped. If the job turns out to be more involved once the pipe is opened or the line is inspected, we explain that before the scope changes.
Nothing is scheduled until the price is agreed. You are not committing to anything by calling. You are finding out what the repair involves and what it costs. That is the call. One call and the repair is scoped.
We handle plumbing work throughout Converse and the communities nearby. If you are in Universal City, Schertz, Selma, Live Oak, Kirby, Windcrest, Cibolo, or San Antonio, the same process applies. You call, describe the problem, get a price, and confirm the visit. Geographic coverage across the wider Bexar County area means most addresses in this part of Texas fall within reach.
If you are not sure whether your address is covered, the fastest way to find out is to call and ask.
The most common signs are drains that slow across multiple fixtures at the same time, a gurgling sound after flushing, or a backup that clears on its own and then returns within days or weeks. In Converse and surrounding Bexar County neighborhoods with mature tree canopies, root infiltration into sewer lines is common because clay soils shift and open pipe joints over time. A camera inspection confirms whether roots are the cause and shows exactly where the entry point is. From there, we explain what the clearing or repair involves before any work begins.
The Edwards Aquifer supplies much of the water in the Bexar County region, and it carries a high mineral content. Hard water leaves scale inside pipes, water heaters, and fixtures, reducing flow and shortening the life of equipment over time. A water softener connects to the main supply line at the point of entry, before the water reaches any fixture or appliance, and the installation covers the supply connection, unit placement, drain line for the regeneration cycle, and a bypass valve. We scope the installation based on your existing supply configuration and the size of the household.
A sump pump is worth considering for any structure in a low-lying area or one that has experienced water intrusion during heavy storm events. Bexar County's clay-heavy soils drain slowly, and significant rainfall can push water into below-grade spaces faster than it can escape naturally. A sump pump installation covers the pit, the pump unit, the discharge line, and the float switch that triggers the pump automatically. We assess the drainage situation at the property and recommend the right pump for the volume the space is likely to see.
A burst pipe, a major water line leak, a sewer backup coming up through floor drains or toilets, and a complete loss of hot water in a household with young children or elderly residents all qualify. Flooding from a failed supply line or a fixture that cannot be isolated at the shutoff valve is also an emergency situation. We take calls for all of these at any hour, any day, and the scope is worked out on the phone before a visit is arranged.
Call (726) 200-5632 and describe what is happening.
Calls are answered at any hour, and the scope of the problem is worked out on the phone as soon as you call. We take short-notice work and prompt response, even for last-minute plumbing calls, is part of how we operate. The visit is arranged based on what is available when you call, and that is confirmed on the call rather than promised in advance.
Call (726) 200-5632 to find out what the schedule allows for your situation.
A repipe is worth discussing when the existing pipe material has deteriorated to the point where repairs in one section are followed quickly by failures in another. Galvanized pipe in older Converse homes narrows from the inside with rust and mineral buildup, which drops water pressure and causes discoloration at the faucet. When that pattern is happening across multiple locations rather than one, replacing the supply lines is often more practical than repeated spot repairs. We scope the extent of the work on the call and explain what a full or partial repipe involves for your specific property.
Low pressure and recurring leaks in older homes usually trace back to the pipe material. Galvanized pipe corrodes from the inside, narrowing the interior diameter over time and reducing flow. Joints and fittings in older copper systems can develop pinhole leaks as the pipe wall thins with age. Clay soils in Bexar County also shift with seasonal rainfall and dry spells, which puts sustained stress on supply and drain lines. A pressure assessment and pipe inspection identify where the restriction or failure is occurring before any part is replaced.
Clear the area under any sink where work is being done, and make sure the water heater is accessible if that is part of the visit. If the main shutoff valve is behind stored items in a utility area, clear a path to it before the visit. For drain work in a bathroom or kitchen, removing items from under the cabinet gives the plumber room to work without delay. Let us know on the call if there are any access challenges and we will tell you what to have ready.
The scope starts with the description you give on the call, which tells us where the problem is presenting and how long it has been developing. In person, the plumber assesses the symptom at the source and confirms whether the job matches what was described or whether something additional is visible. For drain and sewer work, a camera inspection gives a direct view inside the line so the scope is based on what is actually there. The price is tied to the scope, and if the scope changes, that conversation happens before any additional work proceeds.
A drain cleaning visit starts with identifying where the clog is and whether it is isolated to one fixture or affecting multiple drains. A drain snake clears most standard blockages. For lines with heavier buildup or a blockage that a snake pushes past rather than removes, hydro jetting uses pressurized water to scour the pipe wall and clear what is inside. If the drain slows again within a short time after clearing, a camera inspection is the next step to find out whether a structural issue in the line is contributing to the recurring problem.
The visit focuses on the specific problem that was described on the call. For a water heater visit, that means checking the unit for sediment buildup, the condition of the anode rod, the thermostat, and the connections at the supply and discharge lines. For a pressure problem, the visit covers the pressure reducing valve, shutoff valves, and the condition of the supply lines. For a drain or sewer issue, the plumber checks the fixture, the trap, and the line downstream. The scope of what gets checked is tied to the problem, not a fixed checklist applied to every visit.
A running toilet is usually audible as a hissing or trickling sound that continues after the tank has filled. A leaking wax ring shows up as water around the base of the toilet, often after flushing. A running toilet wastes water steadily and can add a significant amount to a monthly water bill depending on how long it goes unaddressed. The fix is usually a worn flapper, a faulty fill valve, or a damaged flush mechanism, all of which are assessed and replaced during the visit.
When a water heater is past the point where repair makes sense, we walk through replacement options on the call. That covers tank versus tankless, the right size for the household's demand, and what the installation involves in terms of the water and gas line connections. The old unit is removed as part of the installation visit. For tankless units, we confirm the gas line or electrical configuration before anything is ordered so the installation scope is clear before the visit is booked.
A tank water heater stores a set volume of hot water and keeps it at temperature continuously. A tankless unit heats water on demand and does not store it, which avoids standby heat loss but requires specific gas line sizing or electrical capacity to deliver the flow rate the household needs. Hard water in the Bexar County area affects both types differently. Tank units accumulate sediment faster in hard water conditions. Tankless units can scale at the heat exchanger if the incoming water is not treated. We scope the installation based on the existing connections and the household's demand.
Converse Plumbing Company is available at any hour, any day of the week, including weekends and holidays. When something goes wrong with the plumbing, the call is the first step and the price is the second. Nothing moves forward until both of those are done.
Call (726) 200-5632 to get a quote.
Describe the problem, hear what the fix involves, and confirm the visit when the price is settled. Call in the morning. Describe the leak. Hear what the fix involves.
Below is a plain-language look at the plumbing work we handle in Converse and across Bexar County. Each row covers what the service involves, who it fits best, and one practical detail worth knowing before you call.
Read through, then call us at (726) 200-5632 to get a price and confirm the visit.
| Plumbing Service | What's Included | When to Call | Worth Knowing |
|---|---|---|---|
| Slab Leak Detection & Repair |
| Homes with warm spots on the floor, damp carpet, or rising water bills | Clay soils in Bexar County shift with seasonal rain, which puts ongoing stress on under-slab lines. |
| Water Heater Repair & ReplacementMost Popular |
| Households or businesses with no hot water, inconsistent temperature, or an aging unit | Hard water from the Edwards Aquifer accelerates sediment buildup inside tank units, shortening their useful life. |
| Tree-Root Sewer Line Service |
| Homes near mature trees with recurring slow drains or backups that clear and return | Clay soils here open pipe joints over time, giving roots a path in that sandier ground would not. |
| Sewer & Main Line Service |
| Properties with sewage odor, recurring backups, or slow drains across multiple fixtures | Mature tree canopies in established Converse neighborhoods make root intrusion into sewer lines a common finding. |
| Faucet & Fixture Installation |
| Homeowners replacing worn fixtures or upgrading a kitchen or bathroom | Installation is fitted to the existing supply and drain configuration, not forced into a rough-in that does not match. |
| Emergency Plumbing |
| Any situation where water damage is active or a fixture cannot be isolated at the shutoff | Calls are answered at any hour, any day. The scope and the price are worked out on the phone before a visit is arranged. |
| Garbage Disposal Service |
| Kitchens with a failed, noisy, or leaking disposal unit | A disposal that hums but does not spin is often jammed rather than failed, which is a quick fix on the visit. |
| Water Softener Installation |
| Households dealing with scale on fixtures, inside pipes, or inside water heaters | The Edwards Aquifer supplies hard water across this region, and mineral buildup affects pipes, fixtures, and water heater efficiency over time. |
| Water Pressure & Shutoff Valve Repair |
| Properties with noticeably low or inconsistent water pressure | Galvanized pipe narrows from the inside as it corrodes, which is a common pressure cause in older Converse homes. |
| Drain Cleaning & Clog Removal |
| Homeowners or tenants with slow or fully clogged drain | A clog affecting multiple fixtures at once usually points to the main line, not an individual drain. |
| Sump Pump Installation |
| Low-lying properties or structures that take on water during heavy storm events | Bexar County clay soils drain slowly, so even moderate rainfall can push water into below-grade spaces faster than it escapes. |
| Leak Detection & Repair |
| Properties with unexplained water bills or visible water damage | Hidden leaks behind drywall or under a slab are located before any surface is opened. |
| Toilet Repair & Installation |
| Homeowners dealing with a running, leaking, or non-flushing toilet | A running toilet can waste a significant volume of water before the problem becomes obvious on a bill. |
| Whole-Home Repiping |
| Older homes with galvanized pipe, recurring leaks, or persistent low pressure across multiple fixtures | A repipe is scoped on the call so you know what the work involves and what stays in place before anything is scheduled. |
| Well Pump Service |
| Properties on a private well with no water, low pressure, or cycling pump issues | A pressure tank that has lost its charge will cause the pump to cycle on and off rapidly, which is diagnosable on the visit. |
What are the signs that a water heater is failing rather than just running low?
A water heater that is genuinely failing usually shows more than one symptom at the same time. Inconsistent temperature, a popping or rumbling sound from the tank, water pooling around the base, or discolored water at the hot faucet are all signs something needs attention. A unit that simply runs out of hot water during heavy use may just be undersized. We diagnose the unit first to distinguish a repairable problem from one that points to replacement.
How do you find a leak that is not visible at any fixture or fitting?
When a leak is not presenting at a visible fixture, we use pressure testing and electronic detection methods to locate the source without opening walls or floors first. A pressure drop in a closed system tells us the leak is there. Electronic detection narrows the location. Video inspection confirms what is happening inside the line. The source is identified before anything is cut or opened, which keeps the repair scope as small as the job actually requires.
What is hydro jetting and when does it make more sense than snaking a drain?
Hydro jetting uses high-pressure water directed through the pipe to cut through grease, mineral buildup, compacted debris, and root intrusion that a drain snake pushes past rather than removes. Snaking clears a path through a blockage. Hydro jetting scours the pipe wall. When a drain clogs repeatedly after snaking, or when a main line has significant buildup, hydro jetting addresses the cause rather than the symptom. We confirm the condition of the pipe with a camera before jetting so we know what the line can handle.
Cause Found Before Anything Is Replaced
We diagnose the problem first. Whether it is a water heater, a drain, or a supply line, the cause is confirmed before a repair is recommended and a price is agreed before the work begins.
How can I tell whether a clog is in one fixture or in the main line?
A clog isolated to one fixture, a single sink or one shower, is almost always in the trap or the branch line serving that fixture. When two or more fixtures are draining slowly at the same time, or when flushing a toilet causes water to back up into a tub, the problem is downstream of where those fixtures connect, which points to the main line. That distinction matters because the clearing method and the access point are different for each situation. Describing which fixtures are affected when you call helps us scope the visit accurately.
How do tree roots get into a sewer line and how is the damage repaired?
Roots follow moisture, and a sewer line is a consistent moisture source. They work their way into pipe joints and hairline cracks over time, then expand as they grow. In established Converse neighborhoods, clay soils shift with seasonal rain and dry spells, which opens joints that would otherwise stay sealed. The repair depends on what a camera inspection shows. Roots that have entered but not cracked the pipe can be cleared mechanically or with hydro jetting. Where the root intrusion has cracked or collapsed a pipe section, we explain the repair options, including trenchless methods where the pipe condition allows it, before any work begins.
Is the work inspected and does it need to meet local code?
Drain and pipe work is carried out to the standards the local code inspectors here enforce. Whether a job requires a permit depends on the scope and the jurisdiction, and we confirm what applies to your address before the work is scheduled. Fixture installation, water heater replacement, and repiping each carry their own requirements, and those are part of the scope conversation on the call.
Code-Compliant Work on Every Job
Pipe and drain work is carried out to the standards the local code inspectors here enforce. Permit requirements are confirmed for your address before anything is scheduled.
When does a faucet drip point to a simple fix versus a bigger problem?
Most faucet drips trace to a worn washer, a failed cartridge, or a damaged O-ring, all of which are addressed during the visit. A drip that returns quickly after a repair, or one accompanied by low pressure or discoloration, can point to a supply line issue or pipe corrosion upstream of the fixture. We assess the faucet and the supply connection on the visit so the fix addresses what is actually causing the drip rather than just the symptom at the fixture.
What is the difference between a slab leak and a regular supply line leak?
A slab leak is a failure in a supply or drain line that runs through or beneath the concrete foundation. Because the pipe is embedded in or under the slab, the leak is not visible at a fixture or fitting. Signs include warm spots on the floor, damp carpet without an obvious source, a water meter that moves when all fixtures are off, or a water bill that climbs without a clear reason. Electronic detection and pressure testing locate the source before any concrete is touched. The repair options depend on where the leak is and the condition of the surrounding pipe, and we explain those before any slab access begins.
Emergency Leaks and Backups Handled
Calls for burst pipes, sewage backup, and major leaks are answered at any hour, any day. The scope and the price are worked out on the phone before a visit is arranged.
How long does a water heater replacement typically take?
A standard tank water heater replacement is usually completed in a few hours once the visit is underway, assuming the existing connections are compatible with the new unit. A tankless installation takes longer because the gas line or electrical supply often needs to be assessed and sometimes modified to meet the unit's demand. We scope that work on the call so there are no gaps in what the visit covers. The timeline for your specific situation is part of the conversation before anything is scheduled.
What causes low water pressure across the whole house rather than just one fixture?
When pressure is low at every fixture, the cause is usually upstream of the fixtures themselves. A pressure reducing valve that has drifted out of range, a partially closed main shutoff, or a corroded galvanized supply line that has narrowed from the inside are the most common causes in this area. Galvanized pipe is particularly common in older Converse homes, and the interior corrosion that reduces flow is not visible from outside the pipe. A pressure assessment and supply line inspection identify where the restriction is before any part is replaced.
Can I attempt to fix a plumbing problem myself before calling?
Shutting off the water at the fixture or at the main to stop active damage is always the right first move, and you do not need a plumber for that. Beyond isolation, the risk with DIY repairs is that the visible symptom and the actual cause are often different things. A drain that clears with a chemical treatment may slow again within days if the underlying buildup or root intrusion is still there. A toilet that stops running after adjusting the fill valve may have a failing flapper that will cause the same problem again. Calling to describe what is happening costs nothing and gives you a clear picture of what the repair actually involves before you decide.
Call (726) 200-5632 to describe what is happening, get a straight answer about the pipes, and confirm the visit when the price is settled.
(726) 200-5632